How to upgrade the firmware of your camera

  1. Download the correct file and unzip the archive. 
  2. Insert a memory card in your camera and connect it via USB to your computer. Turn the camera on so it is identified as an external drive. 
  3. Copy the firmware file in the root of the memory card. 
  4. You can also perform this operation using a memory card reader. 
  5. Once the firmware has been successfully copied, disconnect the USB cable or put the card back in the camera. 
  6. 5 seconds after turning the camera on the upgrade will start. 
  7. Once it's finished the camera will turn itself off. 
  8. Turn it back on to start using the new firmware.


Warning do not turn off the camera or remove the battery during the upgrade process, as this can permanently damage the camera.

Make sure the battery has at least 50% of capacity left before you try upgrading.